Cables are an essential part of every computer and communications network
installed today, yet quite often they are the last component taken into consideration.
A significant element
of our core business is to provide our clients with quality cable assemblies
and harnesses manufactured to order for an extensive range of applications
- from basic office peripheral connectivity, for printers and SCSI devices
to more complex hardware interconnectivity for routers, switches, IP Telephony
and PBX’s.
Using our vast experience plus a comprehensive database consisting of over
1000 individual cable assemblies, we can usually match specific requirements
utilising an existing cable specification. If however you should require
a customised cabling solution, we can select the cable, connectors and accessories
to suit your specific requirements and provide a tailor-made solution.
We understand quality is of paramount importance and stringent procedures
are employed throughout our design and manufacturing processes to ensure
the final products are of the highest calibre.
Cablelink manufacturer cables for Nortel Networks and provide an extensive
range of cables for Passport, BayStack, Meridian and BCM systems as well
as older legacy systems such as DPN and Centillion.
Cablelink also supply a very extensive range of router cables manufactured
to cover Cisco Systems as well as, 3Com, ACT Networks and IBM (Nways). We
constantly strive to enhance the product portfolios of each product set in
order to offer our clients the most up to date and comprehensive selection
of router cables and accessory items we can. Our additions now include the
provision of an extensive list of IEC320 power cords, Cisco Aironet RF cables
as well as Cisco compatible Analogue Voice Gateway patch panels.
In addition, we have recently further enhanced our product portfolio with
the addition of GBIC and SFP Transceiver modules compatible with systems
by companies such as Cisco, 3Com, Hewlett Packard, Nortel, Foundry, Alcatel,
Huawei, and Allied Telesysn.
Enhanced
Category 5 (Cat 5e) and Cat 6 UTP, FTP & STP patchcords,
flyleads and accessories for structured cabling systems.
Coaxial cabling
for G703 75 ohm applications, including BT2002, 2003, 3002, RG59 and RG179
cables using connectors such as BNC, Type 43, Type 43HD & UHDC,
SMA, SMB/SMZ, TNC, F Type plus 1.0/2.3 mini BNC’s.
Coaxial cabling
using RG6 dual shotgun, low loss LMR400 and ultra low loss LMR600 cables
terminated with F Type and/or reverse polarity BNC and TNC connectors specifically
for RF systems such as the Cisco Aironet range.
Balanced PRI
G703 cables using 120 ohm balanced cable equipped with ‘D’ type
interfaces and/or RJ45.
ISDN T1/E1 RJ45 and RJ48 cables, plus RJ11 terminated
ADSL Broadband cables.
Single mode OS1 9/125 plus Multi-mode OM1 class 62.5/125
and OM2/OM3 50/125 class fibre optical patchcords in both duplex and simplex
configurations; utilising the full range of ST, SC, MIC (FDDI), E2000,
FC/PC, MT/RJ, LC and MU connectors.
Ethernet IEEE 802.3, Thick and Thin
Ethernet coaxial cabling (10Base2, 10Base5), twisted pair (10BaseT, 100BaseT,
1000BaseTX) and AUI drop cables.
IBM Cabling System cables including Token
Ring (802.5) patchcords, drop-leads and balun assemblies.
Telephone system
connectivity cables including Telco, RJ21, Amphenol assemblies, BT600,
BT431A, BT631A, RJ11 and RJ45 interfaces.
Voice gateway
patch panels compatible with Cisco’s VG248 and VG224
Analogue Voice Gateway products.
Ribbon cable
assemblies using flat straight and multi-pair ribbon terminated with
header blocks and ‘D’ connectors.
Power
cables using IEC320 compliant connectors such as C13/C14 (kettle lead),
hot C15/C16, C5/C6 cloverleaf, C7/C8 figure 8, 16 amp C19/C20 as well as
IP44/IP67 16 and 32 amp rated Industrial connectors used on cables such
as Cisco’s CAB-AC-2500W-INT.
A/V and Broadcast cables; DVI-D, DVI-A
and DVI-I, VGA/SVGA, Musa and HDMI; plus specialist cables for Sony and
Panasonic cameras as well as Triax cables for outside broadcast use using
connectors by manufacturers such as Lemo (BBC) plus Fischer and Hirose
(Sony/Panasonic).
